Some people do not know how to arrange their golf clubs properly and are stuck with a club that does not fit their play style and physique.
As a result, they end up having bad games despite their skills.
Let’s look at how to assemble golf clubs and make yourself the perfect clubs!
- Good Drills For Putting Stroke
- What Length Golf Club Should I Use
- How To Choose A Golf Club Set
- What Is The Average Distance For Each Golf Club?
- What Is A Hybrid Golf Club Used For
- What Is The Best Golf Club To Practice With
How To Assemble Golf Clubs Set- Instructions Club Assembly
If you click on this article and worry that the process may cost you a lot of money, then you can let out a relieved sigh now.
In fact, making your unique golf clubs can be much less expensive than buying them from the store.
Moreover, you will get a more active role in picking your own parts and materials if you assemble your clubs correctly.
Factoring each part into the whole product will give you a better understanding of your clubs and control the ending product’s price.
Without further ado, let’s get started!
Step 1: Organize Your Components
The first instructions to building your golf clubs set is definitely to do your research to see which shafts, clubs head, and grips fit you and your play style the most.
Through your searches, you can also compare part prices and other prefixes that people often use!
Moreover, the shafts of your clubs is the most important element of your golf club assembly.
Depending on your budget, you can pick between graphite – for a lighter experience overall that weighs on your waller, and steel or other types of metal.
Regardless of material, you should pay attention to the shafts flex stats since it will determine how far you can hit.
If you have a short-hit playstyle and try to save as much money as possible, the suitable shafts for you is a stainless steel one with a lot of giving and bendability.
Other than that, the grip and head you choose are solely dependent on your swing taste.
Put on your reading hat and put the parts into your shopping carts so that you can continue with the next step in this tutorial!
Step 2: Make Your Driver
The most simple step of building your golf club is making the driver, as constructing the driver first will give you an idea of what your final product may look at.
In this way, you are laying the foundation for your next steps.
Firstly, approach a driver’s length.
Professional golfers will instruct you to make the driver a little bit shorter than you need in order to improve the club’s overall accuracy without having to rely on length and strength.
Since you are making your own device, try your hands, see what length is most comfortable, and take any advice with a grain of salt.
You can also use your pre-existing clubs as a base for your design.
However, there is no need for adjustments position if you are already comfortable with the length of your old clubs.
Step 3: Roughen The Shaft
When you’re done dealing with your drivers, it is time to move on working with our golf shaft.
Roughing up your shaft before you attach the heads serves to make it more rigid, thus giving epoxy more friction to bond to the club’s body.
This fact is exceptionally true for graphite shafts as well as steel ones, as they tend to be smooth and even slippery to work with.
If you have purchased a graphite shaft, begin the roughing process by removing the outer coat that marks the joint with the clubhead.
Following that, grind sandpaper, a file, or a sanding belt into the surface to chip away the shaft’s smoothness.
With steel shafts, you only need to do the second step!
Please be extremely careful and pay attention to the material’s thickness and brittleness while you are working.
Specifically, graphite shafts are susceptible to over-grinding and easier to break.
After all those steps are done, go over the surface with sandpaper for a fine finish.
If the shaft is too big to fit into the hosel, you can put a wire drill to work on the opening and let the shaft enter more smoothly.
Step 4: Apply Epoxy
The general rule of thumb for choosing epoxy is: The longer it takes for epoxy to dry or cure, the higher the strength or hold on the material in the long run.
Hence, your golf club will last way longer if you go for the brands that require more work during the mixing start!
It is also worth noting that most epoxies will hold up just fine, but industry ones will do the job much better and much smoother, in our opinion.
Golf epoxies usually have higher strength levels, as well as other functionalities such as elasticity.
Thus, these factors make a truly sturdy clubs since the epoxy already knows what kind of forces are needed for a golf game.
You will not want to be stingy with epoxy.
Hence, generously put epoxy on both the shaft and the hosel before even thinking of assembling the parts together.
This step will require you to be very careful since epoxy can squirt and spray everywhere if you force it too hard.
Additionally, a great way to be sure the shaft is in all the way is to tap the end of the shaft against something hard as it slides.
You should only adjust the shaft’s length after the epoxy has hardened completely, so please wait for at least 24 hours.
Furthermore, you should also pay mind not to put too much force onto the parts during the hardening process to not ruin the epoxy.
If you are working with a steel shaft, use a hacksaw or bandsaw to make changes to its length.
With graphite shafts, you will have to wrap the cutting region with at least three to four layers of duct tape before taking off the length.
If you skip this step, don’t ask us why your shaft shatters itself before you can even work through half its parameters.
Step 5: Install Your Grips
Now, let’s installation the club’s grips!
Clean the area very carefully with grip solvent – a solution that allows you to lubricate tape and brings the grip over the shaft.
After that, you can start adding adhesion with double-sided tape.
The tape will also need to be soaked in grip solvent to make your work way easier in the long run.
While the solvent dries for the next half an hour, you can use this opportunity to make any final changes to your grips.
That is the last part that needs installing for the build.
Give your newly made shaft a day of rest, and you should be able to play with it right after!
That’s all about how to assemble golf clubs!
We hope that now you have a more personalized club, your games will be running smoothly, and scoring will not be a problem from this point on.
Please note down all the important things we have mentioned in each step!